36″ Braided Throttle Cable Kit,Universal Throttle Cable,Throttle Cable Kit, Stainless Steel Throttle Cable Replace For 97-07 Chevrolet/Chevy LS1 Engine 4.8L 5.3L 5.7L 6.0L

Compatible??36″ Braided Throttle Cable Kit Compatible with 97-07 Chevrolet/Chevy LS1 Engine 4.8L 5.3L 5.7L 6.0L . it fits a Factory Five Racing 1965 427 Cobra too /1978 corvette .
Features: General-purpose throttling cable, high-performance braided stainless steel outer tube, lined cable, special extrusion lined design, extending cable life. Including the ability to adjust at the installation end.
Material: 36-inch throttle cable is made of high-quality stainless steel, equipped with aluminum fittings and aluminum ferrules to eliminate wear. The cable length can be adjusted according to your needs. Super thick cable, durable.
Convenient operation: it can be easily cut, more tailored and customized, and provide a wider range of applications. Suitable for most accelerator pedals and accelerator components. Use smooth, unfettered cable operation, no cotter pins or positioning screws, suitable for factory and after-market pedals, easy to install.
After-sales service: If you have any questions during the purchase or installation process, you can contact our customer service team at any time, and we will definitely provide you with the most satisfactory shopping experience. Product color: silver Product size: as shown Product material: stainless steel
The package includes: 1*Throttle cable 1*wrench

For 97-04 Chevrolet/Chevy LS1 Engines 5.7L.
For 99-07 Chevrolet/Chevy LS1 Engines 4.8/5.3/6.0L.
Please check if this product is compatible with your car before purchasing the vehicle??

Throttle Cable Adjuster

Fixed Internal Cable Regulator

Weaving Steel Protective Sleeve

Adjustment Allen Wrench

Installation Notes:
1. Before beginning the installation, disconnect the negative battery cable and use wheel chocks to block the vehicle’s wheels.
2. The hole in the firewall must line up with the hole in the upper arm on the Throttle Pedal. Determine exactly where the Throttle Cable needs to pass through the firewall.
3. Remove the carb end assembly. Pull the inner wire out of the cable housing,insert the firewall fitting through the firewall from the engine side.
4. Insert the throttle cable adjuster into the Cable Mounting Bracket. NOTE:There must be some slack to allow for engine movement.
5. Reinstall the inner wire into the cable housing from inside the passenger compartment. Connect the clevis (or the ball end if the clevis was removed) to the Throttle Pedal.
6. Attach the carb end assembly to the throttle arm. Tighten the nut.
7. Cut the inner wire off so that roughly 1″ of the inner wire will remain inside the carb end assembly.
8. Insert the inner wire into the carb end assembly. Pull all the slack out of the inner wire and tighten the set screw in the carb end assembly.
9. Check for proper operation of the throttle (and Kickdown if equipped) and adjust as necessary. Make sure there is no binding in the throttle linkage and that the throttle returns to the closed position when the pedal is released.