15 Inch 67lb/300N Gas Strut,Lid Supports,Gas Shocks,Lid Stay for RV Bed Tool Box Cabinets Boat Cover Window Camper Shell and Other Custom Heavy Duty Project, Set of 2

FORCE:67 Lbs/300 N(Per Strut),LENGTH(Center-to-Center):14.96 inch(380 mm),COMPRESSED LENGTH(Center-to-Center):9.06 inch(230 mm).Bracket Holes’ Size: 8 mm(diameter),8 mm(diameter),10 mm X 8 mm(Length X
SET OF 2 IN THE PACKAGE:It could hold open 67 lb individually or together for around 134lb on any object such as car lid ,trailer,bed,RV under-bed storage, trap door etc.
INSTRUCTIONS&SCREWS NOT INCLUDED In the package,While you can feel free to Click “Ask Seller” Besides Your Order for In-time Assistance
HOW TO INSTALL&ADJUST IT:As the Upper Mounting Point ,it should be 4-5 inch,5.5 inch maximum towards the hinge on the lid.While If you want to adjust the Upper Mounting Point,just do as the Product
100% SATISFACTORY WARRANTY: We offer 1 year 100% satisfactory warranty,if unfortunately our gas strut did not work well ,please kindly contact us for exchange, refund or return Suitable Gas Strut for Wood Bin with Heavy Lid
Do you want to get struts to help open/close doors and it stays in place until you pull it down ?
Are you looking for the suitable gas strut for your Wood Bin with Heavy Lid?
Look at this, It is so nice for you to be able to use both hands inside the box without balancing the lid at the same time

Suitable Gas Strut for Bed in Your Trailer
Do you feel it’s difficult to open your bed open with your hand or have to have your husband/wife hold it open while you get stuff out ?
Are you looking for the suitable gas strut for the Bed in Your Trailer ?
Here’s it, because once you open the lid with these struts on, they stay open until you physically close them

Suitable Gas Strut for Window Well Cover
Do you find something are good for your Window Well Cover ?
Look at this one, It do keep the window well cover open enough to avoid banging your head when you try to open/close the cover

HOW TO INSTALL APEXSTONE 300N/67LB GAS STRUTS?
1.Determine the Upper Mounting Point ,it should be 4-5 inch,5.5 inch maximum towards the hinge on the lid (do this bracket last so you can line up the closer with the side of the cabinet),as distance to the side of the lid, it depends on the thickness of your box,then mark A ,drill 2 holes on the sides of the center point A
2.Determine the Lower Mounting Point, open the lid to the angle where you want it open, keep in mind that the strut does not need to be perfectly vertical when determine the lower mounting point,as distance to the side of the lid,normally it’s 10 mm/2/5 inch ,then mark B ,drill 2 holes on the sides of the center point B
3.Fix the connectors and connect the joints and the strut

HOW TO ADJUST APEXSTONE 300N/67LB GAS STRUTS MOUNTING POSTION ?
1. If you feel powerful, move the upper mounting point 0.79 inch towards the hinge on the lid (0.79 inch once)
2. If you feel weak, move the upper mounting point 0.79 inch towards the opposite of the hinge on the lid (0.79 inch once)
3. When you adjust the upper mounting point ,you should adjust the the lower mounting point at the same time