Extension Cable 2pin/3pin/4pin/5pin/6pin Julet Female/Male Single Head DIY Waterproof Line for Electric Motorbike Kit Light Throttle Ebrake Display

The single-head waterproof signal line is divided into male and female connectors, and the other end is the signal line of the corresponding color, which can be used according to the drawing.
There are 2Pin/3Pin/4Pin/5Pin/6Pin Connectors with Multiple Specifications to Make Your Modification Easier
The 900 mm cable length is enough to modify the lights, displays, Ebreak and throttle on electric bicycles, electric motorcycles or electric scooters
Waterproof grade IP66, when the cable is exposed, you don’t have to worry about short circuit or water ingress. It can be used perfectly in rain and snow
It Can Be Used not Only On Electric Bicycles, But Also Where You Need to Use Signal Cables in DIY Can Meet Your Needs.
We use Amazon’s FBA warehouse, your order will be shipped in the nearest warehouse, and the package will reach you in the shortest possible time. Ebike Extension Cable 2pin/3pin/4pin/5pin/6pin Julet Female/Male Single Head DIY Waterproof Line for Electric Motorbike Kit Light Throttle
JULET Ebike Cable 2pin/3pin/4pin/5pin/6pin Female/Male Waterproof Head Single Line
There are 2PIN/3PIN/4PIN/5PIN/6PIN and other specifications. One end is a waterproof cable and the other end is a loose cable. Please refer to the picture for the corresponding circuit diagram.JULET brand signal cable, waterproof connector is suitable for outdoor use, IP66 waterproof allows the cable to be used in rainy days, without worrying about the problem of water ingress and short circuit of the connector,Especially suitable for the use of bare lines on electric bicycles, electric scooters, and electric motorcycles , It can also be perfectly matched on outdoor equipment

Various models to choose from
2 pin Female/Male-900mm
3 pin Female/Male-900mm
4 pin Female/Male-900mm
5 pin Female/Male-900mm
6 pin Female/Male-900mm
Signal line for bicycle Lights/Throttle/Ebrake/Display/Control of electric bicycles or electric scooters

Under what circumstances would you choose?
When you’re concerned about loose fittings or water ingressWhen you need to use the device in rainy or wet conditionsWhen you think ordinary cables are clutteredWhen you are concerned about poor contact causing unstable signalWhen you DIY the pursuit of more beautiful cablesBe careful when you need to plug and unplug cables frequently
Technical Parameter
Operating temperature range: -40??~+85??Rated voltage: 200V ACRated current: 3A (determined by cable according to specific conditions)Contact resistance: ??10m??Contact: Copper alloy tin/gold platingProtection level: IP66Mechanical life: 200 times

Red-2pin Female/Male
Yellow-3pin Female/Male
Blue-4pin Female/Male
Green-5pin Female/Male
High quality copper wire, stable signal, double insulating rubber tube on the outside, durable.

High quality rubber material can maintain good insulation and protection function at -40 ?? C ~ +85 ?? C

Waterproof connector withstand voltage: AC 200V 50Hz 1 minute without breakdown or flickerPin contacts are copper alloy tin/gold platedMechanical life: 200 times

Product model:
JL-F-Z209AT.Z309AT.Z409AT.Z509AT.Z609AT
Temperature range:
-40 ?? C ~ +85 ?? C
Rated voltage:
200V AC
Rated current:
3A (determined by cable according to specific conditions)
Contact resistance:
??10m??
Insulation resistance:
??10M?? under normal conditions and humid conditions
Withstand voltage:
AC 200V 50Hz 1 minute without breakdown or flashing
Contact:
Copper alloy tin/gold plating
Protection level:
IP66
Mechanical life:
200 times
Maximum outer diameter:
9mm
Overall length:
900mm
Use wire specification:
0.05mm-0.2mm 2
Applications:
Power supply and signal transmission for electrical and electronic equipment??Light/Throttle/Ebrake/Display??